|
MOUNT SOPRIS INSTRUMENT CO., INC.
Recognized World Leader for over 50 years manufacturing Borehole Geophysical Logging Systems
|
|
|
MSLog - Version 7 Installation Updates Overview Mount Sopris Instruments has released the MSLog data acquisition software version 7.48 for the MGX II logger. It operates on Windows 95/98, Windows NT, Windows 2000, Windows XP. This version was developed to provide support for a number of digital, down hole logging probes on Windows XP SP2. Note: Tools which record large amounts of data such as the 2SAA-1000, 2SAA-100-F, 2SNA-1000-S, ABI40, FAC40 require Windows 2000 or Windows XP for proper detection of the data. Problems communicating with these tools may result while operating MSLog with Windows 9x. Distributions are also changed occasionally to add functionality and provide support for different probes e.g. new tool driver files, updated user manuals and help files. MSLog v 7.48 is available for download to all customers with a valid license. There is a full and partial download, both of which contain all executables and tool driver files. Wellcad is currently shipping at version 4.0. Contact Mount Sopris for information on upgrading previous versions to Wellcad v 4.0. Additional links are provided to download the MSLog users manual and an update for Wellcad version 2.5. Contact Mount Sopris for information on upgrading previous versions to Wellcad v 4.0. Distribution Notes: This distribution was updated March 2, 2006. It contains new browsers for the ABI40 and OBI40 Televiewers, as well as changes for the 2SNA-1000S spectral gamma tool which are needed to operate properly with Windows XP Service Pack 2. We anticipate that this will be the last version of MSLog as our production moves to the Matrix Logger. Matrix software is not available on this site contact the factory for support. The installation copies calibration and track setting information and maintains them in the current folder. It also removes outdated links and files that remain if the previous installation is not removed first. Contact Mount Sopris Instruments for more information. What tools are covered by MSLog version 7.48 ? MSLog version 7.48 will operate, in addition to all standard tools previously supported:
What does my MGX II need to be compatible with this software? The firmware, that is the programs in the microprocessors, in the MGX II must be the correct version to operate with MSLog. The firmware version is affected by the crystal frequency of the Master processor. The crystal is a half-inch long, narrow metal can with numbers, indicating its operating frequency, written on top. The crystal is next to U1 on the main board of the MGX II. Just to the left of the crystal is the label X1. For systems with a master crystal frequency of 22.1184 MHz:
For systems with a master crystal frequency of 24 MHZ:
Contact Mount Sopris Instruments if you have any questions. These MSLog installations contain complete help and all the executables and tool driver (.tol) files needed to install and operate MSLog version 7.48. There are two versions available for download by clicking the links at the end of these instructions. The partial install does not contain the Adobe Acrobat Reader or the tool user documentation, in PDF format, that comes with the full install. The full install is a copy of the Factory shipped, CD installation. You can use either of these new installations if you currently have installed any of the following MSLog versions:
If you have MSLog v5.02 you need to have a firmware update before you can use this version of MSLog. Contact Mount Sopris Instruments if you have any questions. Download/setup instructions: 1) Download the file by clicking on its’ link. Make note of the location on your drive that you downloaded to. Make sure to save to disk unless you have followed steps 2 and 3 below. 2) Backup any files in your current installation that you wish to save, such as data (*.las, *.rd), tool drivers (*.tol) or modified headers (*.wch) or PDF documents (*.pdf). 3) Uninstall your current version of MSLog. (This is not strictly necessary as this version will remove orphaned links and files remaining from the previous installation). NOTE: If you have an existing installation of MSLog version 7.43 or 7.48 distributed on a CD, and you download the partial installation, do not uninstall it before copying or otherwise backing up the .pdf files in \MSLog\Doc\Pdf folder. You can also temporarily rename the \Pdf folder then, after you uninstall and install MSLog, copy the .pdf documents from that folder to the newly created one. As mentioned above it is not necessary to uninstall the previous version however if you want to uninstall your current version do the following: a) Click Start, Control Panel, Add/Remove Programs. b) Select MSLog and click Add/Remove. 4) Expand the installer by running the file downloaded using the links below. Double-click the appropriate file from your Windows Explorer. SETUP.EXE will run automatically. Click here to download MSLog7_48PartialInstall3-02-06.exe, This self-extracting file of version 7.48 build 823 of MSLog does not have Adobe Acrobat Reader or the Adobe Acrobat PDF user documentation, which are available in the full installation below. It is approximately 10Mb in size. Click here to download MSLog7_48FullInstall3_02_06.exe This download file is the complete installation package as distributed on CD (approximately 60 MB). It is a self-extracting file that installs MSLog version 7.48 build 823. It includes Acrobat reader and user documentation in Adobe Acrobat PDF format.
Click here to download the latest MSLog Manual (currently Version 7) in .PDF format. The file is 50+ pages (780 KB) and takes about 4 minutes to download with a 56K modem.
For a FREE upgrade of Wellcad ( V 2.5 Build 2628) click here. We recommend that Wellcad users running earlier builds upgrade to version 4.0 for the latest interface with MSLog.
Customers using Logshell on Celeron (Pentium) or other fast computers click here for information on Moslo.
|
|
Send mail to with questions or comments about this web site.
|